?> How to End Common Mistakes When laying Laminate Flooring >

How To End Common Mistakes When Laying Laminate Flooring

Are you looking to install Laminate flooring? If yes then you should be aware of some common mistakes when laying Laminate Flooring most people make. I will provide 14 common mistakes when laminate flooring. With a wide variety of design options for homeowners, laminate flooring and common mistakes when laying Laminate Flooring are a big topic for some people.

This is because the boards are made to look like exotic woods and patterns combined with their cost-effectiveness.

Laminate flooring can be as cost-effective and fun if you design it yourself and install it.

Although there are common mistakes when laying laminate flooring.

If you’re thinking of laying new laminate flooring in your home, you should try to avoid such mistakes.

This article will teach you what to avoid, what to make sure you do, and what to expect when laying laminate flooring.

Common mistakes when installing laminate flooring

What is Laminate Flooring?

Laminate flooring is a hybrid image laminated to a wood substrate, that has a laminate protective coating over the top. It’s essentially a photograph of synthetic material.

Laminate flooring is a modern solution designed to imitate natural stone and wood flooring. It is made up of layers of wood, plastic, and rubber.

This modern laminate flooring is also heat resistant and provides a moisture barrier.

Now let us check most of the common mistakes when laying laminate flooring.

14 Common mistakes when laying laminate flooring

  • Ignorance of Flooring ideas.
  • Selecting the wrong flooring location.
  • Avoid moisture Floors.
  • Not preparing the floor
  • Not letting your laminate flooring adaption
  • Not adding moisture protection
  • Not laminating the uneven surfaces of the floor
  • Not using underlayer foam
  • Not using a leveler
  • Not using a Damp-proof barrier.
  • Skipping Laminate Edge.
  • Not Allowing Movement of joints
  • Using faulty planks
  • Not allowing to dry the glue completely

1. Ignorance of Flooring ideas

Before you start your work at home, make sure you have quality information on how to set up your work.

Any person with a little bit of technical background will surely finish the job.

Saying that it is always a better idea to go through some educational videos on the subject.

Make sure you have proper tool kits to make your work easier for you. There is no doubt, you can finish your work in a good manner.

2. Selecting the wrong flooring location.

Laminate flooring is an attractive, durable, and affordable alternative to traditional hardwood flooring.

However, a common laminate floor installation mistake is choosing a location where moisture and humidity can cause bucking and bubbling.

As a result, a floor that was installed correctly in one area might buckle or bubble in another.

To avoid some common laminate floor installation mistakes is to choose your location wisely

3. Avoid moisture Floors.

If you’re considering laminate flooring, it may seem like the perfect solution.

Laminate is easy to install, doesn’t need sanding, and is a stylish option when you’re renovating your home.

But one thing to remember is that laminate flooring is not great when it comes to moisture.

To avoid some common laminate floor installation mistakes is to choose your location wisely.

If you have a wet area in your home, it’s best to avoid installing laminate flooring in those parts.

The kitchen, bath, entryway, or garage are all possible trouble spots for bucking and bubbling when the underlying wood substrate has absorbed moisture.

4. Not preparing the floor

One of the most important parts of a remodel project is the preparation and installation of the laminate flooring.

Preparing the floor properly is not only important to ensure a successful installation but also to prevent any damage to the flooring or the subfloor.

The best way to prepare the floor is to scrape, clean, and remove any old drywall mud, paint, staples, etc.

5. Not letting your laminate flooring adaption

When installing any wood flooring, it’s important to know how to let it ‘adapt’ first. This is when you let the wood get used to the humidity levels in your home.

When you have your flooring planks in the wrong place, they will warp and buckle.

This happens because the moisture in your home changes the wood.

Follow the instructions on the box, but as a guide, let your flooring planks get used to the humidity levels in your home.

6. Not adding moisture protection

Your newly installed laminate flooring could be in trouble if it’s not properly sealed.

When you install your flooring, make sure to seal it with silicone caulk, glue, or another sealant.

This will protect it from spills and accidents on the floor that could leave your flooring looking unsightly and damaged.

7. Not laminating the uneven surfaces of the floor

Laminate flooring is a popular choice for many people because of its level of durability and easy installation.

However, if you have a soft spot on your floor, you might end up with a bump or a sagging soft spot.

To prevent this, make sure the floor beneath is level before installation.

You can use a combination of grinding, sanding, and using self-leveling material to help ensure you have a clean and level surface to prevent sagging soft spots or unusual bumps in your flooring.

8. Not using underlayer foam

Underlayment is the material useful to provide a flooring surface with a degree of comfort, protection, and support.

Also called “flooring underlayment.” Underlayment is a type of material placed between a subfloor and a finished floor.

It increases the comfort, protection, and structural integrity of the floor.

Why is underlayment necessary? The main reason for using underlayment is to prevent the laminate flooring from bending and flexing.

It does so by providing a flooring surface with a degree of comfort and support.

Without underlayment, the laminate flooring is susceptible to cracking, buckling, and splitting.

9. Not using a leveler

A lot of people believe that the floor underneath a laminate floor can be uneven.

If the floor is uneven, it can cause the laminate floor to move or sag in a certain area, causing a bump in the floor and an uncomfortable feeling.

To avoid this issue, make sure that the floor beneath the laminate floor is level.

One way to check is to put blue painter’s tape across the room’s baseboard where you want to install laminate.

You can also use a laser level or a spirit level for more accuracy. If you’re not sure where to level the floor, you can measure from the walls and adjust the legs of the laminate floor until it’s level.

10. Not using a Damp-proof barrier.

A damp-proof material is typically a foil or plastic sheeting material that prevents condensation from forming on the floor when it gets too damp.

Most fungicides and surface treatments require a damp-proof material to be installed and then sealed with additional materials.

The moist conditions in the ground can cause damp-proof materials to fail, which can cause all kinds of problems for the home and for you.

11. Skipping Laminate Edge.

The best way to avoid a problem like this is to measure your flooring before you install it. Too many people skip this step and end up with a sub-par job.

Before you start laying down your flooring, you should make sure you measure the size of the area you plan to cover.

For the proper installation of laminate flooring, you will need to leave a minimum amount of space around the perimeter of the flooring.

Make sure the planks are cut at a 45-degree angle and firmly fitted together. This is known as the “Laminate Edge”.

12. Not Allowing Movement of joints

In the world of furniture, joints are called “movement joints.” When it comes to furniture, these joints are designed to allow endwise movement that is typically restricted by the material of the furniture.

For example, wooden furniture has a tendency to expand and contract due to temperature changes. This is where a movement joint comes into play.

These joints allow for a more natural movement and are commonly found in wooden furniture.

Different types of furniture have different joints and can be made from many materials.

 13. Using faulty planks

A plank is a large piece of wood useful for flooring. It’s typically formed from a single log, with the grain running vertically.

These planks are typically either made from solid wood or engineered wood.

There are many problems with planks. Some are developed from manufacturing defects that can eventually lead to serious problems.

Some are caused by the wood shrinking or expanding with the seasons.

14. Not allowing to dry the glue completely

Laminate floors are attractive, easy to install, and affordable. But, they do have their drawbacks.

One of the most common problems is the flooring being damaged before it is even installed.

It is important to allow the glue to completely dry before walking on it. It creates many problems, such as lifting and buckling the new flooring, which then requires extensive repair work.

In this post, you will learn how to avoid these problems and keep your laminate flooring looking brand new for years to come.


1. What happens if you don’t leave a gap with laminate flooring?

A common problem with both laminate and engineered flooring systems is when the floor expands and there is no expansion gap to allow for movement.

This will cause laminate floorboards to be forced up, often causing a bounce into the click system where the boards might damage the click system.

The solution is to create an expansion gap in the floor which is usually done by cutting a 45-degree angle in the flooring.

2. Do you start in the middle when laying laminate flooring?

When planning a plank installation, it is important to know that the planks are always installed from left to right.

You should always start in the left corner of the longest wall and work towards the light source.

This creates a nice, fluid installation that is not too long and not too short.

3. What happens if the laminate is too tight?

Due to the fact that the laminate is glued to the wall, it is susceptible to warping and buckling when the humidity or temperature changes.

If the laminate is too tight against the wall it can cause the laminate to lift up, tear, or crack.

In some types of laminates, the glue can actually cause the laminate to shrink or grow, which can create more problems.

In order to prevent warping and buckling, it is important to make sure the laminate is acclimated to the humidity and temperature before being laid down.

4. Why is my new laminate floor buckling?

Laminate flooring is a common type of flooring that is fairly easy to install. Unfortunately, laminates are also an easy target for moisture damage.

Not only can it warp the floor, but it can also cause buckling. Buckling or warping is almost always a result of moisture and/or water damage.

Laminate flooring is affected by water in a number of ways. High moisture content in the air can sometimes lead to buckling or warping.

Excessive water on the surface of the floor can also lead to buckling or warping. 

5. How far from the wall should laminate flooring be?

A common problem for wooden floors is the spaces between the flooring and the walls.

If the gap is too big, moisture can build up, rot can form and the flooring can start to split.

To prevent these problems, you should leave a 10mm gap between the laminate flooring and the walls on all sides.

This 10mm gap should be even on both the floor and the walls, too.

The same applies to other solid objects such as doorframes, heating pipes, stoves, and radiators that are flush with the floor and furniture.

6. How do I make sure the first row of laminate flooring is straight?

As you plan for your flooring installation, you might find that the wall is not level. To make sure the flooring is level, start by measuring from the wall to the floor.

If the flooring is too long, measure 2 inches away from the wall and add 1/4 inch to the measurement (for example, if the flooring is 5 inches wide, measure out 5 1/4 inches).

This measurement is where you’ll find the distance from the wall to the cut line of the tile. Next, use the chalk line to snap a line in the middle of the floor.

Next, mark the first and last lines of the floor pattern, and then connect the two lines to create the pattern you want for the floor.

You may also like 10 Best Home remodeling ideas for better living.


We hope you enjoyed our blog post about common mistakes when laying laminate flooring.

There is no denying that laminate flooring is a great option for many people, but there are a few mistakes people make when installing it.

We shared these mistakes with you so you can avoid them in the future and get the most out of your laminate flooring.

We are pretty sure now you have a good idea of how to install laminate flooring and can confidently install laminate flooring.

If you like this article, please share and comment.



Leave a Comment